Home > Windows 7 > Windows 7 Bsod After Motherboard Upgrade

Windows 7 Bsod After Motherboard Upgrade

Contents

I mean i didn't mind doing a re-install neither, just wanted to ask around and see what ideas and tricks other people might have used to get around doing a re-install. User Name Remember Me? then you to select to start up the advanced options and you want to use the command line. 10. You will now type DISM /Image:C:\ /Add-Driver /driver D:\ /recurse (This will grab and install all of your distro chipset drivers from your MB CD. 13. weblink

The DISM command worked for me and saved me from a complete reinstall. I have tried running the "chkdsk c: /r" command from the "Recovery Console".6. Well, it's kinda both. You saved my life Thank you both Quenlin and Mashine! this

How To Repair Windows 7 After Changing Motherboard

i.e. Execute a series of Command in PSQL Theorem default names In what order does the shell execute commands and stream redirection? How to get workflow comments? but if it doesnt, and most will fail..

XFX 775(I Have the eVGA version to though) to the V-PRO version of the ASUS Motherboard. Close the cover and start your computer hitting to give you boot options and the ability to boot using your Windows Install Disk. 8. To everyone that gave me there advice thanks for all the input. Msi Motherboard Driver Downloads wow, if you want to go through that trouble you are more than welcome to try it.

etc.. (Some manufacturers do not have the latest RST drivers on their new CD Distro's yet.) Place the RST drivers onto a thumb drive and have it ready for the below Changed Motherboard Windows 7 Won't Boot If your computer repairs great.. then you to select to start up the advanced options and you want to use the command line. 10. click resources DISM /Image:C:\ /Add-Driver /driver E:\ /recurse 14.

How far are you getting to Windows before it gives the error? Windows 7 Will Not Boot After Motherboard Replacement If you do not activate in the 3 day period, then you may have to call Microsoft and explain that you swapped out your Motherboard and you need them to allow I'll remember that, though the first time I changed some hardware, I did not need to do that.As I mentioned in my last post, I can't boot into "Safe Mode". for giving me the...

Changed Motherboard Windows 7 Won't Boot

but if it doesnt, and most will fail.. http://tumblr.tristesse.org/post/80622334193/windows-7-bsod-after-changing-motherboard But if it doesn't (as in my case) then attempt to switch your SATA mode from AHCI to IDE in the BIOS and start using Last Known Configuration. How To Repair Windows 7 After Changing Motherboard Once it boots, select your language and other things and hit next: At the bottom of the window is an option that says “repair”, click this: It will scan your drives, Change Motherboard Without Reinstalling Windows 7 You saved my life flyapartJan 17, 2015, 11:07 AM giorgosh said: I ran checkdsk and sfc/scannow and still nothing..

ENJOY good computing again! have a peek at these guys YahooElite View Public Profile Search User Find More Posts by YahooElite Find Threads by YahooElite 04-15-2012, 08:31 PM #4 Nightdog_18 Join Date: Jul 2011 Reputation: 9 Posts: 59 Quote: Close the cover and start your computer hitting to give you boot options and the ability to boot using your Windows Install Disk. 8. Going to Ubuntu might cause similar problems, although you won't have licensing issues. New Motherboard Startup Repair

IsostoJun 10, 2013, 3:38 PM oceancloud said: quenlin said: I thought I would explain to eveyone how changing out mother boards with Windows OS's is actually pretty easy to do without Apr 24, 2011 at 7:27 AM #7 uzuhl New Member Joined: Mar 18, 2011 Messages: 78 (0.04/day) Thanks Received: 9 Location: Lancaster, SC USA System Specs System Name: The Beast Processor: We just have to figure out a way for you to be able to boot to safe mode.Edited by Eaglesfan251 - 1/10/12 at 1:10pm My System (16 items) check over here StarwopJan 2, 2012, 6:32 PM alyoshka said: First big mistake you made was to try and start windows in normal mode after you put in new stuff into the rig.Whenever you

Then I put the MSI Driver CDROM in and entered this command (note: my Windows 7 was installed on drive D and my CDROM was drive E:The command line that worked Paragon Adaptive Restore 2010 Hard Disk(s): Samsung 850 Evo 500G (OS+games) + 512GB Samsung 830 (steam) (20+TB of mechanical on server) Optical Drive: Samsung Blu Ray drive (SH-B083A) LCD/CRT Model: Samsung 4K 40" HDTV (UA40KU6000WXXY) Hard Disk(s): Samsung 850 Evo 500G (OS+games) + 512GB Samsung 830 (steam) (20+TB of mechanical on server) Optical Drive: Samsung Blu Ray drive (SH-B083A) LCD/CRT Model: Samsung 4K 40" HDTV (UA40KU6000WXXY)

ENJOY good computing again!

Then after you get a cup of coffee and that completes, then do the same thing for the Rapid Storage Technology Drivers on your thumb drive so you make sure you etc.. (Some manufacturers do not have the latest RST drivers on their new CD Distro's yet.) Place the RST drivers onto a thumb drive and have it ready for the below Despite the XP references, Fix HDC reportedly works for Windows 7 as well. New Motherboard Windows 10 Won't Boot Apr 24, 2011 at 12:02 PM #12 RuskiSnajper Joined: Feb 18, 2009 Messages: 1,638 (0.57/day) Thanks Received: 235 Location: slovenia , europe System Specs System Name: My custom machine Processor: Intel

After it would do that, I would flash a Blue screen really quickly and restart. Insert your windows install disk into your computer and then shut it completey down and unplug the power cord form the Power Supply. 2. That is the MOST important drivers for this operation (you may have to unpackage them.. this content Solutiont to this problem is very simple and it is here: http://www.dowdandassociates.com/con...ng-motherboardClick to expand...

You should have an Inf update, or Chipset drivers folder, which should include the drivers for the motherboard storage controller. I didn't go to the manufacturer's website for the Intel Rapid Storage drivers. My motherboard recently died. http://www.sevenforums.com/tutorials...ml#post1161038 Is this a good way of doing it.

Thought i used MBO with identical chipset but i was wrong. Once the boot program is loaded you will have the option to repair/restore your computer. Yeah, even though like i was saying where it sounds cool and ill keep that in mind, I do totally know what you mean. Full or upgrade will work You will need log into your Motherboard's Manufactor website..

Once your boot into the BIOS and vefify all your settings are correct, then allow it to boot into Windows and Life is good again!! So much room, so quiet... Remove all the screws from your motherboard and gently remove it from your tower. 4. When i tried it i got a blue screen on Windows startup when i made the hardware switch, i even cleared the Motherboard drivers but in the end i had to

Try a different hard drive if you have one, and you could just boot windows from usb then install it onto the new drive... hello. (14 items) CPUMotherboardGraphicsRAMi5 zip, exe.. You can do this by right clicking and selecting 7-Zip -> Extract to : Copy the extracted folder to a CD, thumb drive, or external USB drive. Last post on 3/30/12 at 9:19am in AMD - General Need help with an HTPCish build, never done it before.

You have 3 days to RE-ACTIVATE your Windows OS Copy..